Moisture Resistant Thermistor Sensor
- Can accommodate a wide array of thermistor sensing elements
- Wide operating temperature range: -40°C to 125°C
- Excellent for freeze/thaw applications in refrigeration, HVAC and
- Standard cable length is 10 ft.
- Standard housing is .25" OD Nickel-plated Brass
Jackcon moisture resistant design for thermistor temperature
assemblies provides a solution for the primary cause of sensor
failures in high moisture environments. Many temperature sensing
applications in HVAC, appliance and other industries, require that
the sensor be mounted in or near areas that are subject to
freeze/thaw cycles that, in the past, have led to long term
stability problems. This was due to the fact that the seal between
the sensor wires and epoxy or housing and epoxy would fail and
moisture from the environment would eventually find a path to the
thermistor body leading to resistance shifts and/or short circuits.
This design from Jackcon provides for an excellent moisture seal
between all parts of the system and deters water from entering the
assembly. A unique internal construction is utilized as well as a
special combination of wire and epoxies to provide a moisture
resistant seal to the outside environment and, thus protecting the
thermistor sensing element.
Any number of different thermistor curves and values can be
accomodated as well as a broad range of housing and wire styles.
Terminations can be provided utilizing various connector pins or
lugs. Please contact the factory for specific design or application
information or the availability of options.
Suitable for HVACR applications, Water flow monitoring, Gas
Boilers, General Instrumentation applications
|Part Number||R25 (Ω)||Material Curve||Wire Color||Customize|
|Standard temperature accuracy is ±0.2°C from 0°C to 70°C.|
Other resistance values and accuracies available upon request.